Configuring Parallels 2X Remote Application Server

The below diagram shows a typical Parallels 2X Remote Application Server scenario with 2X Publishing agent connected to a Radius server.

Configuring Radius Properties

  1. Parallels 2X RAS Console > Connection >Second Level Authentication tab.

  1. Select Radius as a Provider

  1. Click Settings

  1. The following window shows the connection properties tab:

1. In the ‘Server’ text box enter the hostname or IP of the Radius Server.

2. In the ‘Port’ text box enter the port number for the Radius Server.

3. In the ‘Timeout’ text box, specify the packet timeout in seconds.

4. In the ‘Retries’ text box, specify the number of retries when attempting to establishing

A connection. The global timeout is timeout * retries.

5. Type the Secret Key and Specify the ‘Password Encoding’, either PAP (Password Authentication Protocol) or CHAP (Challenge Handshake Authentication Protocol), according to the setting Specified on the Radius Server. Click ‘Ok’ after configuring the connection settings.

6. Click the ‘Check connection’ button so that you validate the above connection

Settings inserted. If the connection settings are configured correctly, you will a confirmation message.

If your Radius vendor requires specific attributes click the ‘Attribute’ tab and then select Add:

1. Select the vendor for the attribute from the ‘Vendor’ dropdown list.

2. Select the vendor attribute from the ‘Attribute’ dropdown list.

3. Enter the value for the selected attribute. The value can be a numeric value, a string,

AnIP or a time value.