Reporting
The reporting tab will allow the
user to select and configure a ‘Reporting Engine’.
Selecting a Reporting
Engine
Select one of the following
‘Reporting Engine’:
- eG
Innovations – Integrates with eG Enterprise Server
- None
– No Reporting Engine is
used.
2X ApplicationServer
Reporting
Using eG Innovations
Reporting Engine
- You
will need to specify the eG Server IP address or
hostname.
- Specify
the port in use by the
Server..
- Click
Download to start downloading the approved eG
Agents.
- When
the downloading agents is ready, the following window will be displayed, showing
that all agents are available.
2X Application Server – eG
Agent Status
- Click
on Reporting Engine tab to continue with the
configuration
- For
additional security select SSL ‘Use SSL
connection’ and select
‘Allow trusted certificates
only’.
- Click
‘Manage eG Agents for Components...’ to start installing eG Agents.
The window below will be
shown:
Manage eG Agents
Note
1 - Only servers with 2X Terminal Server
agents installed can be managed for eG Agents. Otherwise the servers are not
listed.
Note
2 – If 2X Terminal Server Agents are
not verified for communication, the server becomes disabled and eG Agents cannot
be updated.
- Select
the Terminal Servers and click ‘Update agent(s)...’. The following
window pops
up.
Installing eG Agent
- Click
install, so that the eGAgent is pushed on the Terminal
Server.
Installing Progress of eG
Agent
- The
status of the eG Agent being installed is
shown.
Installed eG Agent on Terminal
Server
- Press
done after the installation process finishes.
